Quick Delivery DT Swiss EXC 1501 SPLINE 30 Carbon Boost 6-Bolt Disc 29″ Wheelset

DT Swiss EXC 1501 30 Carbon Boost 6-bolt disc 29″ wheelset – carbon wheels for rough terrain

With the EXC 1501 SPLINE wheelset from DT Swiss on your 29″ MTB you will cut a fine figure in Enduro races. The carbon rims form the foundation for a light but durable wheelset. The hookless rims which are reinforced on the sidewalls are connected to the 240 hub by straight pull spokes. A 30 mm inner rim width and Boost standard leave plenty of room for wide tyres and give the opportunity to drive with low tyre pressures. The rear wheel has the most modern freehub technology that the Swiss have to offer. The Ratchet EXP freehub has 36 teeth and transmits your pedalling power without any loss. Unpleasant>

Specifications:

Application:

Enduro, Cross Country

Wheel Size:

29″

Tyre Type:

clincher tyre

Number of Spokes:

28

Brake Type:

6-bolt disc

Wheel Standard:

Boost

Tubeless System:

Tubeless Ready

Technical Information – Rim:

Rim Flange:

without hook

Dimensions (ETRTO):

30-622

Inner Width:

30 mm

Outer Width:

36 mm

Depth:

25 mm

Valve Hole Diameter:

SV / Presta (6.5 mm)

Rim Material:

Carbon

Technical Information – Front Hub:

Type:

240 straight pull

Over Locknut Dimension:

15 x 110 mm thru-axle

Bearings:

steel bearings

Body Material:

Aluminium

Technical Information – Rear Hub:

Type:

240 straight pull

Over Locknut Dimension:

12 x 148 mm thru-axle

Bearings:

steel bearings

Body Material:

Aluminium

Freehub Body Material:

Aluminium

Freehub Body:

Ratchet EXP 36

Technical Information – Lacing:

Front Lacing Pattern:

3-cross

Rear Lacing Pattern:

3-cross

Spoke Type:

DT Competition Race / straight pull

Spoke Material:

stainless steel (18/10)

Nipple Type:

DT Pro Lock Squorx Pro Head

Nipple Size:

15 mm (length) / 2 mm (diameter)

Nipple Material:

Aluminium

Approved For:

Weight Limit:

120 kg (system weight)

Air Pressure (max.):

see manufacturer’s specifications

Recommended Tyre Width:

see manufacturer’s specifications

Technology:

Intended use – Category 4:
Suitable for use in very rough terrain with jumps of up to approx. 120 cm in height and speeds of up to 40 km/h. Very good riding technique is required. The components must be checked for damage after each ride.

SPLINE:
Straight pull hubs, straight spokes and strong rims result in a durable wheel. It can therefore be reliably used in training and competition.

Ratchet EXP:
A ratchet and a threaded ring are integrated into the hub. This reduces the number of components required, resulting in less wear and tear and a lower weight. In addition, the heavy-duty and reliable ratchet system can be easily and quickly maintained. The no-tool concept plays a decisive role, as it allows the freehub to be replaced without any tools. The freehub has two discs which engage simultaneously. This means that the contact surface is large and the point load is kept small, which exonerates the material and allows the freehub to work particularly reliably and precisely.

Pro Lock:
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-centred several times without any problems, this adhesive strength will only slightly decrease. The connection between spoke and nipple cannot loosen by itself.

Colour Index:

black:

• Rims: black with grey decals
• Hubs: black with grey decals
• Spokes: black
• Nipples: black

Models:

29″ set (front 15×110 Boost + rear 12×148 Boost) SRAM XD:

Freehub:

SRAM XD

Gearing:

11-/12-speed

Manufacturer Numbers:

WEXC150BFIXCA11499 + WEXC150TFDRCA11501

Contents:

• 1 x DT Swiss EXC 1501 SPLINE wheelset (front and rear wheel)
• 1 x DT Swiss Shimano Micro Spline freehub body
• 2 x DT Swiss tubeless valves
• 2 x DT Swiss tubeless rim tape rolls