Online Maxxis Dissector 3C MaxxTerra EXO+ WT TR 27.5″ Folding Tyre – 2022 Model

The Dissector 3C MaxxTerra EXO+ WT TR 27.5″ Folding Tyre by Maxxis – The Troy Brosnan Signature Tyre

Note from the manufacturer:
Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used.

Guidelines for replacing E-bike components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Application:

All Mountain, Enduro

Ground Conditions:

loose over hard, medium, loose, wet

Type:

folding tyre

Tubeless System:

Tubeless Ready

Technical Information:

Rubber Compound:

3C MaxxTerra

Carcass:

60 tpi

Puncture Protection:

EXO+ Protection

Models:

27.5×2.4

Dimensions:

27.5 x 2.4″

ETRTO:

61-584

Air Pressure:

3.4 bars

Manufacturer Number:

1104

27.5×2.6

Dimensions:

27.5 x 2.6″

ETRTO:

66-584

Air Pressure (max.):

2.75 bars

Manufacturer Number:

2652

Technology:

3C MaxxTerra
The Freeride version of Maxxis 3C compounds. More grip and traction than the 3C MaxxSpeed compound, with less rolling resistance and longer durability than 3C MaxxGrip. The> At Maxxis, the 3C tread is moulded from three different rubber compounds in one piece and not subsequently assembled from two strips. Therefore, the treads can be shaped exactly according to the requirements of the respective tyre model, thus optimising the riding characteristics.

EXO+ Protection
Based on a 60 tpi carcass, EXO+ features the proven EXO sidewall protection and a small butyl insert around the bead. EXO+ ranks between EXO-Protection and DoubleDown carcasses in terms of robustness and weight.

Tubeless Ready
Tubeless tyres have many advantages: you can ride with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube, the risk of punctures is reduced. Maxxis TR tyres are better prepared for mounting with sealant than other ” tubeless ready” tyres. The bead of the Maxxis TR tyres is completely covered with a rubber layer like a real UST tubeless tyre. As a result, tubeless mounting is successful for all rims with standard dimensions even during the first inflation and with little liquid.

Wide Trail (WT)
This design optimises the tread layout and tyre shape on today’s modern wider rims. Traditional tyres are designed for narrower rims and become square on wider rims, resulting in a less than optimal performance. WT tyres are optimised for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension of 30 – 39 mm. Concerns tyres with a width of 2.4″ and above.

Contents:

• 1 x Maxxis Dissector 27.5″ folding tyre