Exclusive Design DT Swiss E 1900 SPLINE 30 Boost Disc Center Lock 29″ Wheelset

The DT Swiss E 1900 SPLINE 30 Center Lock Disc 29″ wheelset for Enduro bikes with Boost

The E 1900 SPLINE wheelset from DT Swiss fits 29″ Enduro bikes with Boost standard. The rims have an inner width of 30 mm, which makes them>

Specifications:

Application:

Enduro

Wheel Size:

29″

Tyre Type:

clincher tyre

Number of Spokes:

28

Brake Type:

Center Lock Disc (Boost)

Wheel Standard:

Boost

Tubeless System:

Tubeless Ready

Technical Information – Rim:

Type:

E 532

Rim Flange:

with hook

Dimensions (ETRTO):

30-622

Inner Width:

30 mm

Valve Hole Diameter:

SV / Presta (6.5 mm)

Rim Material:

Aluminium

Technical Information – Front Hub:

Type:

370 SPLINE

Over Locknut Dimension:

15 x 110 mm thru-axle

Body Material:

Aluminium

Technical Information – Rear Hub:

Type:

370 SPLINE

Over Locknut Dimension:

12 x 148 mm thru-axle

Body Material:

Aluminium

Freehub Body Material:

Aluminium

Freehub Body:

Ratchet LN 18

Technical Information – Lacing:

Front Lacing Pattern:

3-cross

Rear Lacing Pattern:

3-cross

Spoke Type:

DT Champion, straight pull

Spoke Material:

steel

Nipple Type:

DT Pro Lock Squorx

Nipple Material:

Aluminium

Approved For:

Weight Limit:

130 kg (system weight)

Air Pressure (max.):

see manufacturer’s specifications

Recommended Tyre Width:

see manufacturer’s specifications

Technology:

Intended use – Category 4
Suitable for use in very rough terrain with jumps of up to approx. 120 cm in height and speeds of up to 40 km/h. Very good riding technique is required. The components must be checked for damage after each ride.

Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-centred several times without any problems, this adhesive strength will only slightly decrease. The connection between spoke and nipple cannot loosen by itself.

Ratchet LN
The Ratchet LN freehub is used to convert DT Swiss 370 hubs with pawls to a toothed disc freehub. The advantage, compared to pawls, is the significantly larger contact surface with improved frictional connection. The seal attached to the freehub body, and not to the hub shell as usual, makes the freehub body easily replaceable. The modular design allows free selection of the engagement angle (18, 24, 36 or 54 teeth) and of the freehub body.

SPLINE
Straight pull hubs, straight spokes and strong rims result in a durable wheel. It can therefore be reliably used in training and competition.

Colour info:

black:

• Rims: black with grey decals
• Hubs: black
• Spokes: black
• Nipples: black

Models:

29″ set (front 15×110 Boost + rear 12×148 Boost) Shimano:

Freehub:

Shimano MTB

Gearing:

8-/9-/10-/11-speed

Manufacturer Numbers:

W0E1900BEIXSA18815 (front) + W0E1900TEDLSA18817 (rear)

29″ set (front 15×110 Boost + rear 12×148 Boost) Shimano Micro Spline:

Freehub:

Shimano Micro Spline

Gearing:

12-speed

Manufacturer Numbers:

W0E1900BEIXSA18815 (front) + W0E1900TED2SA18816 (rear)

29″ set (front 15×110 Boost + rear 12×148 Boost) SRAM XD:

Freehub:

SRAM XD

Gearing:

11-/12-speed

Manufacturer Numbers:

W0E1900BEIXSA18815 (front) + W0E1900TEDRSA18818 (rear)

Contents:

• 1 x DT Swiss E 1900 SPLINE 29″ 30 Boost Center Lock Disc Wheelset (front and rear wheel)
• 2 x DT Swiss tubeless valves
• 2 x DT Swiss tubeless rim tape rolls