Exclusive Design Cane Creek Crown Race for 110 Series

Spare aluminium crown race for the 110 series by Cane Creek.

Models:

IS41/30

• Compatibility: integrated (IS), external cup (EC), zero stack (ZS)
• Head Tube (Frame Inner Diameter): 41 mm
• Crown Steerer Tube: 30 mm
• Axle to Crown: 1 mm
• Use: 1 1/8″ lower head tubes in combination with standard 1 1/8″ lower steerer tubes
• Manufacturer Number: BAA0170A

IS47/33

• Compatibility: integrated (IS), external cup (EC), zero stack (ZS)
• Head Tube (Frame Inner Diameter): 47 mm
• Crown Steerer Tube: 33 mm
• Axle to Crown: 1 mm
• Use: 1 1/4″ lower head tubes in combination with standard 1 1/4″ lower steerer tubes
• Manufacturer Number: BAA0699A

IS52/30

• Compatibility: integrated (IS), external cup (EC), zero stack (ZS)
• Head Tube (Frame Inner Diameter): 44 mm, 49 mm, 52 mm, 56 mm
• Crown Steerer Tube: 30 mm
• Axle to Crown: 1 mm

Use: For 1.5″ lower head tube diameters combined with standard 1 1/8″ lower steerer tubes.

• Manufacturer Number: BAA0463A

IS52/40

• Compatibility: integrated (IS), external cup (EC), zero stack (ZS)
• Head Tube (Frame Inner Diameter): 44 mm, 49 mm, 52 mm, 56 mm
• Crown Steerer Tube: 40 mm
• Axle to Crown: 1 mm

Use: For 1.5″ lower head tube diameters combined with 1.5″ forks.

• Manufacturer Number: BAA0173A

Standardized Headset Identification System (S.H.I.S.):

In order to clarify and bring uniformity to a sea of headset standards, manufacturers Acros, Cane Creek, Hope, Race Face, Reset Racing and Ritchey have agreed upon using a shared nomenclature, which will likely include more participating companies in the future. This system takes into account a combination of frame and fork dimensions. Both the upper and lower part of the headset are marked by two alphanumeric>

Nomenclature:

EC:

Bearings contained within cups that are located outside of the frame (external cup).

ZS:

Bearings contained within pressed-in cups where the cup and bearings rest inside the frame (zero stack).

IS:

Bearings that fit directly into a bonded or machined interface that is integrated into the frame (integrated).

Contents:

• 1 x Cane Creek 110 crown race